TEL: 0086-532-68069698

Factors that need to be considered before installing LED street lights

Return list Reffer:Kaich
Factors that need to be considered before installing LED street lights
Click number:- Release time:2021-09-15

With the improvement of the level of economic development and the prosperity of various social undertakings, LED street lighting has become an important part of the beautification of the landscape. In order to ensure the smooth progress of street lighting projects, street lighting electrical suppliers and installers should actively participate in the street lighting plan, and pay attention to the following points when implementing luminous LED street lights:

Factors that need to be considered before installing LED street lights

1. According to the actual and geological conditions of the LED street lamp construction site, design and manufacture the LED street lamp pole foundation and the high pole lamp foundation to ensure that the foundation is firm and reliable. In particular, pay attention to the matching of the pre-embedded bolts and the reserved holes of the rod seat, the positioning is accurate, the embedding length and the external length are reasonable, and the threaded part should be properly protected to facilitate the positioning of the lifting.
2. In rock formations and weathered fossil areas, it is difficult to meet the requirements of decentralized grounding and segmented grounding. It can be considered that the connection of conductors such as galvanized flat steel should be reliable according to design requirements. At the same time, proper protection and treatment should be taken, and reliable connections should be made with the buried foundation to ensure reliable connections between the light poles and the ground. In LED street lights, high pole lights are scattered, mainly relying on grounding. When necessary, a resistance reducing agent should be used to reduce the grounding resistance.
3. A comprehensive understanding of the characteristics of LED lamps, light sources, and light poles, the actual and reference lighting standards for the road, combined with the investment budget, and reasonable selection of solar lighting, light sources, and light poles, so as to give full play to the high efficiency and energy saving of light sources, and the smoothness and finish of solar lamps. The advantages of the accessory combination.
4. On the premise of ensuring the lighting performance, appropriately increase the distance between LED street lights and lanterns to save the number of lamps, appropriately increase the height of LED street light poles, improve the lighting effect, and space the tie rods as far as possible in the road to save engineering Cost.
5. Integrate road engineering, promptly intervene in type selection, foundation construction, timely pre-buried, timely discover problems, make reasonable adjustments, ensure quality, and save investment.
6. According to the actual geological conditions of the LED street lamp project site, design and manufacture the LED street lamp pole foundation and the high pole lamp foundation to ensure a solid and reliable foundation. Special attention should be paid to the matching between the pre-embedded bolts of the rod seat and the reserved holes, the positioning is accurate, the pre-embedded length and remaining length are reasonable, and the threaded part is properly protected, which is convenient for hoisting and positioning.
7. The internal fittings of LED lamps should be installed tightly and firmly to avoid loose wind and poor contact. LED lamps and light poles, light poles and cantilever poles are all reliably fixed. In LED street lights, the poles of the high pole lights must be in place, the lifting frame and the lights must be reliably fixed, the lifting system must be safe and reliable, and the lifting, power limiting, and positioning functions must be complete.


【Paper label】:LED street lighting

Leave a Message